AQUARIO NEO CO2 Diffuser Curved Orignal - S / M / L

$16.00
Size

AQUARIO NEO CO2 Diffuser Curved Orignal - S / M / L

The AQUARIO NEO CO2 Diffusor Curved Orignial is an acrylic CO2 Diffusor with very particular features. The special ceramic membrane produces a fine mist and the CO2 gets dissolved very quickly. Like the other Neo U-Type diffusors by Aquario, the Curved-Type Original is equipped with a long acrylic body, which can function as integrated bubble counter when it is filled with water completely. This way, no external bubble counter is needed.

Moreover, this diffusor has curved tube ends which make it easy to hang the diffuser over the edge of the tank so that unattractive hoses do not disturb the eye anymore.

Usage

Before use, immerse the diffuser in water for 10 minutes so that all the air in the diffuser is displaced. If there is still air in the diffuser, larger bubbles may form at the bottom of the diffuser ceramic.

Dimensions

AQUARIO Neo CO2 Diffusor Curved Original - Small
Height 85 mm
Width 24 mm
Membrane diameter 12 mm
Fits hose 4/6 mm
Width of the clip 9 mm
Fits aquarium 20 bis 30 l nano aquarium, Dennerle Scaper's Tank 35 l oder Nano Cube, ADA Mini M
AQUARIO Neo CO2 Diffusor Curved Original - Medium
Height 85 mm
Width 28 mm
Membrane diameter 16 mm
Fits hose 4/6 mm
Width of the clip 9 mm
Fits aquarium 54 l standard aquarium (60x30x30 cm), Dennerle Scaper's Tank 50 l oder ADA 60-P
AQUARIO Neo CO2 Diffusor Curved Original - Large
Height 105 mm
Width 35 mm
Membrane diameter 23 mm
Fits hose 4/6 mm
Width of the clip 12 mm
Fits aquarium 112 l standard aquarium (80x35x40 cm)

Cleaning

When algae start forming on your PETG equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. PETG-ware is easy to clean, however, it should be done diligently. After the cleaning process, your PETG products will be as good as new.

  • You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
  • Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the PETG products you wish to clean are entirely covered
  • Soak the PETG-ware in the solution for ½ - 1 hours (depending on the severity of the stains)
  • Take it out and rinse thoroughly
  • Now all the stains ought to be gone, and your PETG-ware should shine as if new
  • Attention: Do not add vinegar to chlorine! Risk of death!