AQUARIO NEO U Clip/P Clip

Save 13%
Original Price $8.00
Current Price $7.00
Types

NEO UNIT U & Unit P Clip - M / L 

Description

The Neo Unit U & Unit P Clip by AQUARIO cares for a tidy supply line of air and CO2 hoses. It is available in two sizes (8 mm and 12 mm) and is chosen according to the glass thickness of the aquarium.

Neo-Clip

Due to the processed polycarbonate, this tube connection piece can be attached to the aquarium wall without causing any scratch damages. Thereby, the clip provides a secure hold and prevents unwanted shifting of the hoses.
The Neo Unit U Clip presents the optimal possibility to lead very stiff hoses (e.g. Aquasabi CO2-high-pressure hose LDPE) to their submerse distributors without big loops.

—-

The Neo Unit P Clip by AQUARIO is perfect for air hose and CO2 hoses to fit neatly to the aquarium wall. It cares for a straight and clean supply line.

 Due to the polycarbonate used, the clip can be adapted to the tank optimally and does not cause any damage to the glass.
Visually subtle, the P Clip provides a discreet look while keeping the hose in place. Moreover, disturbing swinging tubes in the water flow are prevented because the Unit P Clip reaches right down to the bottom of the tank where the diffusor can be placed.

Aquario

Alike the Neo Unit Flexible Pipe, the Unit P clip can be individualised by the heat technique.

Features (Unit U Clip)

  • Easy handling
  • Scope of deliver: 2 pieces
  • Chic design
  • Two different sizes of clips for various aquarium glass thicknesses
  • Suitable hose size 4/6 mm 

Features

  • Easy to connect
  • Smooth design
  • Two different sizes for various glass thickness of the tank
  • Possible to individualise with heat technique
  • For hose size 4/6 mm

Dimensions (Unit U Clip)

Neo Unit U Clip - M
Height 450 mm
Width 9 mm
Maximum glass thickness of the tank 8 mm
Neo Unit U Clip - L
Height 450 mm
Width 13 mm
Maximum glass thickness of the tank 12 mm

 

Dimensions (Unit P Clip) 

Neo Unit - P - Clip M
Height 450 mm
Height outside 545 mm
Fits for tank 9 mm
Maximum glass thickness of the tank 8 mm
Neo Unit - P - Clip L
Height 450 mm
Height outside 545 mm
Fits for tank 13 mm
Maximum glass thickness of the tank 12 mm


Cleaning

When algae start forming on your PETG equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. PETG-ware is easy to clean, however, it should be done diligently. After the cleaning process, your PETG products will be as good as new.

  • You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
  • Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the PETG products you wish to clean are entirely covered
  • Soak the PETG-ware in the solution for ½ - 1 hours (depending on the severity of the stains)
  • Take it out and rinse thoroughly
  • Now all the stains ought to be gone, and your PETG-ware should shine as if new
  • Attention: Do not add vinegar to chlorine! Risk of death!